Skip Ribbon Commands
Skip to main content

Power Supplies


HPF24S6 and HPF24S8

The HPF24S6 and HPF24S8 from Gamewell-FCI are compact, cost-effective, 6 amp or 8 amp remote power supplies with integral battery chargers. These adaptable power supplies may be connected to any 12 or 24 volt Fire Alarm Control Panel (FACP) or the power supplies may stand alone.
The HPF24S6 and HPF24S8 from Gamewell-FCI are compact, cost-effective, 6 amp or 8 amp remote power supplies with integral battery chargers. These adaptable power supplies may be connected to any 12 or 24 volt Fire Alarm Control Panel (FACP) or the power supplies may stand alone.

CDP8

The Gamewell-FCI CDP8 Constant-Duty Power Supply is a regulated, power-limited, 24 VDC, 8.0 amp. power supply which can be used anywhere a constant 24 VDC source is required.
The Gamewell-FCI CDP8 Constant-Duty Power Supply is a regulated, power-limited, 24 VDC, 8.0 amp. power supply which can be used anywhere a constant 24 VDC source is required.

GFPS-6

The Gamewell-FCI GFPS-6 is cost-effective power supply panel, providing 6 amps of notification appliance circuit power and built-in synchronization for appliances from System Sensor®, Gentex®, Wheelock®, AMSECO® and Faraday. Its switch mode power supply design is up to 50% more efficient than competitive linear mode power supplies. ADA retrofits are easier and less expensive because it integrates into curent systems without the costly investment in new components.
The Gamewell-FCI GFPS-6 is cost-effective power supply panel, providing 6 amps of notification appliance circuit power and built-in synchronization for appliances from System Sensor®, Gentex®, Wheelock®, AMSECO® and Faraday. Its switch mode power supply design is up to 50% more efficient than competitive linear mode power supplies. ADA retrofits are easier and less expensive because it integrates into curent systems without the costly investment in new components.

GFPS-9

The Gamewell-FCI GFPS-9 is cost-effective power supply panel, providing 9 amps of notification appliance circuit power and built-in synchronization for appliances from System Sensor®, Gentex®, Wheelock®, AMSECO® and Faraday. Its switch mode power supply design is up to 50% more efficient than competitive linear mode power supplies. ADA retrofits are easier and less expensive because it integrates into curent systems without the costly investment in new components.
The Gamewell-FCI GFPS-9 is cost-effective power supply panel, providing 9 amps of notification appliance circuit power and built-in synchronization for appliances from System Sensor®, Gentex®, Wheelock®, AMSECO® and Faraday. Its switch mode power supply design is up to 50% more efficient than competitive linear mode power supplies. ADA retrofits are easier and less expensive because it integrates into curent systems without the costly investment in new components.

HPFF8

The  HPFF8 is a Notification Appliance Circuit (NAC) expansion panel designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF8 connects to any 12 or 24V Fire Alarm Control Panel (FACP) or the power supply may stand alone.
The HPFF8 is a Notification Appliance Circuit (NAC) expansion panel designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF8 connects to any 12 or 24V Fire Alarm Control Panel (FACP) or the power supply may stand alone.

HPFF12

The HPFF12 and HPFF12CM are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF12 and HPFF12CM connects to any 12 or 24V Fire Alarm Control Panel (FACP) or may stand alone.
The HPFF12 and HPFF12CM are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF12 and HPFF12CM connects to any 12 or 24V Fire Alarm Control Panel (FACP) or may stand alone.