Skip Ribbon Commands
Skip to main content

Velociti Series Sensors

​  ​

ASD-PL3/PTL3/PL3R Photoelectric Smoke Sensor

The ASD-PL3 is an addressable photoelectric smoke detector apart of the Velociti Series 3 family. The ASD-PTL3 is an addressable photoelectronic smoke detector with thermal sensing. The ASD-PL3R is an addressable remote test capable photoelectric detector for use with the DNR Duct Base. The ASD-PL3, ASD-PTL3, and ASD-PL3R are compatible with the E3 Series, S3 Series, and 7075 Addressable Fire Alarm Control Panels.
The ASD-PL3 is an addressable photoelectric smoke detector apart of the Velociti Series 3 family. The ASD-PTL3 is an addressable photoelectronic smoke detector with thermal sensing. The ASD-PL3R is an addressable remote test capable photoelectric detector for use with the DNR Duct Base. The ASD-PL3, ASD-PTL3, and ASD-PL3R are compatible with the E3 Series, S3 Series, and 7075 Addressable Fire Alarm Control Panels.

ATD-L3/L3R/L3H Thermal Sensor

The ATD-L3, ATD-L3R, AND ATD-L3H are addressable thermal sensors that utilize a state of the art thermistor sensing circuit for fast response. Apart of the Velociti Series 3 family, the ATD-L3 is a fixed temperature sensor that uses a thermistor sensing circuit to product a 135⁰F fixed temperature alarm. The ATD-L3R provides a combination 15°/minute rate-of-rise temperature sensor with 135⁰ fixed temperature alarm. The ATD-L3H is a variable high temperature detector that provides high temperature detection at 135⁰F - 190⁰F. Compatible with the E3 Series, S3 Series, and 7075 Addressable Fire Alarm Control Panels.
The ATD-L3, ATD-L3R, AND ATD-L3H are addressable thermal sensors that utilize a state of the art thermistor sensing circuit for fast response. Apart of the Velociti Series 3 family, the ATD-L3 is a fixed temperature sensor that uses a thermistor sensing circuit to product a 135⁰F fixed temperature alarm. The ATD-L3R provides a combination 15°/minute rate-of-rise temperature sensor with 135⁰ fixed temperature alarm. The ATD-L3H is a variable high temperature detector that provides high temperature detection at 135⁰F - 190⁰F. Compatible with the E3 Series, S3 Series, and 7075 Addressable Fire Alarm Control Panels.

Multi-Criteria Photoelectric and CO Sensor

MCS-COP3 is an intelligent, addressable smoke and carbon monoxide (CO) detector with integral communication to provide point location for alarm communication and selective maintenance.
MCS-COP3 is an intelligent, addressable smoke and carbon monoxide (CO) detector with integral communication to provide point location for alarm communication and selective maintenance.

Multi-Criteria Fire/CO

MCS-COF3 and MCS-COF3-IV are plug-in addressable devices that provide both fire and carbon monoxide (CO) detection. The detector combines four separate sensing elements to sense multiple components of a fire: smoke, CO, light/flame, and heat. This approach enables enhanced sensitivity to real fire with heightened immunity to nuisance particulates. For CO, the detector’s electrochemical sensing cell creates a separate signal for life safety CO detection.
MCS-COF3 and MCS-COF3-IV are plug-in addressable devices that provide both fire and carbon monoxide (CO) detection. The detector combines four separate sensing elements to sense multiple components of a fire: smoke, CO, light/flame, and heat. This approach enables enhanced sensitivity to real fire with heightened immunity to nuisance particulates. For CO, the detector’s electrochemical sensing cell creates a separate signal for life safety CO detection.

Intelligent Carbon Monoxide Sensor

MCS-CO3 is an intelligent, addressable carbon monoxide (CO) detector with integral communication to provide point location for alarm communication and selective maintenance.
MCS-CO3 is an intelligent, addressable carbon monoxide (CO) detector with integral communication to provide point location for alarm communication and selective maintenance.

ASD-PL2F/PTL2F/PTL2FR Low Profile Photo Sensor

The ASD-PL2F is an addressable photoelectric smoke detector. The ASD-PTL2F is an addressable photoelectronic smoke detector with thermal sensing. The ASD-PL2FR is an addressable remote test capable photoelectric detector for use with the DNR Duct Base. The ASD-PL2F, ASD-PTL2F,  and ASD-PL2FR are compatible with the E3 Series, S3 Series, and 7100 Series Addressable Fire Alarm Control Panels.
The ASD-PL2F is an addressable photoelectric smoke detector. The ASD-PTL2F is an addressable photoelectronic smoke detector with thermal sensing. The ASD-PL2FR is an addressable remote test capable photoelectric detector for use with the DNR Duct Base. The ASD-PL2F, ASD-PTL2F, and ASD-PL2FR are compatible with the E3 Series, S3 Series, and 7100 Series Addressable Fire Alarm Control Panels.

ATD-L2F/RL2F/HL2F Thermal Sensor

The ATD-L2F, ATD-RL2F, AND ATD-HL2RF are addressable thermal sensors that utilize a state of the art thermistor sensing circuit for fast response. The ATD-L2F is a fixed temperature sensor that uses a thermistor sensing circuit to product a 135⁰F fixed temperature alarm.  The ATD-RL2Fprovides a combination 15°/minute rate-of-rise temperature sensor with 135⁰ fixed temperature alarm. The ATD-HL2F is a variable high temperature detector that provides high temperature detection at 135⁰F - 190⁰F. Compatible with E3 Series, S3 Series, and 7100 Series addressable fire alarm control panels.
The ATD-L2F, ATD-RL2F, AND ATD-HL2RF are addressable thermal sensors that utilize a state of the art thermistor sensing circuit for fast response. The ATD-L2F is a fixed temperature sensor that uses a thermistor sensing circuit to product a 135⁰F fixed temperature alarm. The ATD-RL2Fprovides a combination 15°/minute rate-of-rise temperature sensor with 135⁰ fixed temperature alarm. The ATD-HL2F is a variable high temperature detector that provides high temperature detection at 135⁰F - 190⁰F. Compatible with E3 Series, S3 Series, and 7100 Series addressable fire alarm control panels.

ABD-2F Beam Smoke Sensor

The ABD-2F is an addressable projected beam smoke sensor. The ABD-RT2F is an addressable projected beam smoke sensor with integrated sesitivity testing. The ABD-2F/ABD-RT2F is uniquely suited to sense smoke in hostile environments or open areas with high ceilings where spot type sensors are not suitable or dificult to install and maintain. The ABD-2F/ABD-RT2F is compatible with the E3 Series (Velociti mode only) and the S3 Series SLC-PM.
The ABD-2F is an addressable projected beam smoke sensor. The ABD-RT2F is an addressable projected beam smoke sensor with integrated sesitivity testing. The ABD-2F/ABD-RT2F is uniquely suited to sense smoke in hostile environments or open areas with high ceilings where spot type sensors are not suitable or dificult to install and maintain. The ABD-2F/ABD-RT2F is compatible with the E3 Series (Velociti mode only) and the S3 Series SLC-PM.

MCS-Acclimate 2F Multicriteria Sensor

Intelligent, addressable, multi-sensing, low-profile sensor designed for use with the Gamewell-FCI analog addressable fire alarm control panels.
Intelligent, addressable, multi-sensing, low-profile sensor designed for use with the Gamewell-FCI analog addressable fire alarm control panels.

ASD-LS Laser Sensor

The ASD-LS is an addressable, laser, smoke sensor. The ASD-LS uses an innovative laser diode and precision optics , combined with software to provide high precision and ultra-sensitive smoke detection. The ASD-LS is compatible with the E3 Series, S3 Series, and 7100 Series Addressable Fire Alarm Control Panels.
The ASD-LS is an addressable, laser, smoke sensor. The ASD-LS uses an innovative laser diode and precision optics , combined with software to provide high precision and ultra-sensitive smoke detection. The ASD-LS is compatible with the E3 Series, S3 Series, and 7100 Series Addressable Fire Alarm Control Panels.

MCS-COF Multi-Criteria Fire/CO Detector

The MCS-COF is an advanced addressable device that provides both fire and carbon monoxide (CO) detection. The MCS-COF uses four separate sensing elements (Smoke, Light/flame, CO, Heat) for fire detection, and uses  an electrochemical sensing cell to create a separate signal for life saftey CO detection. The MCS-COF is compatible with the E3 Series and S3 Series Fire Alarm Control Panels.
The MCS-COF is an advanced addressable device that provides both fire and carbon monoxide (CO) detection. The MCS-COF uses four separate sensing elements (Smoke, Light/flame, CO, Heat) for fire detection, and uses an electrochemical sensing cell to create a separate signal for life saftey CO detection. The MCS-COF is compatible with the E3 Series and S3 Series Fire Alarm Control Panels.

MCS-4-WARN Advanced Multi-Critera Detector with Four Unique Sensing Elements

The MCS-4-WARN is an advanced addressable detector that uses four complemetary technologies (Electrochecmical, Infrared, Photoelectric, Thermal) into one device to convey accurate fire sensing information to locations where fire fighter response-time is critical. The MCS-4-WARN is compatible with the E3 Series and S3 Series Fire Alarm Control Panels.
The MCS-4-WARN is an advanced addressable detector that uses four complemetary technologies (Electrochecmical, Infrared, Photoelectric, Thermal) into one device to convey accurate fire sensing information to locations where fire fighter response-time is critical. The MCS-4-WARN is compatible with the E3 Series and S3 Series Fire Alarm Control Panels.

B200S Intelligent Sounder Base

The B200S Velociti® sounder base sets a new standard for performance, installation, and aesthetics. It is an addressable sounder base that requires a unique, separate sounder base address. This sounder base is available in only Velociti protocol.
The B200S Velociti® sounder base sets a new standard for performance, installation, and aesthetics. It is an addressable sounder base that requires a unique, separate sounder base address. This sounder base is available in only Velociti protocol.

B200SR Intelligent Sounder Base

The B200SR Series sounder base sets a new standard for performance, installation, and esthetics. It is a nonaddressable base that is available in both Velociti® and Clip™ protocols. The B200SR is designed for new and existing dwelling unit applications. It offers maximum flexibility in installation, configuration, and operation to comply or exceed the UL® Standard 268 and UL® Standard 464
requirements.
The B200SR Series sounder base sets a new standard for performance, installation, and esthetics. It is a nonaddressable base that is available in both Velociti® and Clip™ protocols. The B200SR is designed for new and existing dwelling unit applications. It offers maximum flexibility in installation, configuration, and operation to comply or exceed the UL® Standard 268 and UL® Standard 464 requirements.

B200S-LF Low Frequency Intelligent Sounder Base

The B200S-LF low frequency sounder base is designed to comply with the NFPA 72 sleeping space requirement to produce a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent.
The B200S-LF low frequency sounder base is designed to comply with the NFPA 72 sleeping space requirement to produce a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent.

B200SR-LF Low Frequency Intelligent Sounder Base

The Gamewell-FCI, B200SR-LF sounder base sets a new standard for performance, installation and aesthetics. The B200SR-LF low frequency sounder base is designed to comply with the NFPA 72 sleeping space requirement to produce a fundamental frequency of 520 Hz +/- 10% with a
square wave or its equivalent.
The Gamewell-FCI, B200SR-LF sounder base sets a new standard for performance, installation and aesthetics. The B200SR-LF low frequency sounder base is designed to comply with the NFPA 72 sleeping space requirement to produce a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent.

NCM-1 Noise Control Module

The Gamewell-FCI, NCM-1 Noise Control Module (patented) is used to reduce the common noise (for example, noise that is present on both conductors) on the Signaling Line Circuit (SLC). The NCM-1 allows the use of untwisted, unshielded wire on the SLC. Applications that have audio or fire fighters’ telephones require the use of twisted/shielded wiring for all circuits including the SLC. The NCM-1 may also be used in these applications to further reduce the common mode noise.
The Gamewell-FCI, NCM-1 Noise Control Module (patented) is used to reduce the common noise (for example, noise that is present on both conductors) on the Signaling Line Circuit (SLC). The NCM-1 allows the use of untwisted, unshielded wire on the SLC. Applications that have audio or fire fighters’ telephones require the use of twisted/shielded wiring for all circuits including the SLC. The NCM-1 may also be used in these applications to further reduce the common mode noise.