Skip Ribbon Commands
Skip to main content

Conventional Detectors

​  ​

i3 Series Intelligent Conventional Smoke Detectors

The System Sensor®, i3 Series smoke detectors represent a significant advancement in conventional detection. The i3 family is founded on three principles: installation ease, intelligence, and instant inspection.
The System Sensor®, i3 Series smoke detectors represent a significant advancement in conventional detection. The i3 family is founded on three principles: installation ease, intelligence, and instant inspection.

InnovairFlex Series D4120 Duct Smoke Detector

The D4120, 4-wire photoelectric duct smoke detector features a pivoting housing that fits, and mounts to, both square and rectangular footprints.The D4120  senses smoke in
the most challenging conditions, operating in airflow speeds from 100 to 4,000 feet per minute, temperatures of –4°F to 158°F, and a humidity range of 0 to 95 percent (non-condensing)
The D4120, 4-wire photoelectric duct smoke detector features a pivoting housing that fits, and mounts to, both square and rectangular footprints.The D4120 senses smoke in the most challenging conditions, operating in airflow speeds from 100 to 4,000 feet per minute, temperatures of –4°F to 158°F, and a humidity range of 0 to 95 percent (non-condensing)

InnovairFlex™ Series D2 Duct Smoke Detector

The D2, 2-wire photoelectric duct smoke detector features a pivoting housing that fits, and mounts to, both square and rectangular footprints.The D2  senses airflow speeds ranging from 100 to 4,000 ft/min, operates -4°F to 158°F and has a humidity range of 0 to 95 percent (non-condensing).
The D2, 2-wire photoelectric duct smoke detector features a pivoting housing that fits, and mounts to, both square and rectangular footprints.The D2 senses airflow speeds ranging from 100 to 4,000 ft/min, operates -4°F to 158°F and has a humidity range of 0 to 95 percent (non-condensing).

InnovairFlex™ Series Duct Smoke Detector Accessories

The InnovairFlex Series Duct Smoke Detector accessories add functionality to the Duct Detection System. These accessories are designed to provide quick and convenient, accessibility for visual inspections and they offer effective audible and visible notification options.
The InnovairFlex Series Duct Smoke Detector accessories add functionality to the Duct Detection System. These accessories are designed to provide quick and convenient, accessibility for visual inspections and they offer effective audible and visible notification options.

2151 Low Profile Photoelectric Plug-In Detector

The 2151 low profile photoelectric smoke detector designed to provide open area detection. The 2151 uses an optical sesning chamber to prevent false alarms from failed LEDs.
The 2151 low profile photoelectric smoke detector designed to provide open area detection. The 2151 uses an optical sesning chamber to prevent false alarms from failed LEDs.

302 Series Rate-Compensation Heat Detector

The Thermotech 302 Series Rate Compensation Heat Detectors are normally-open devices designed especially for fire detection and alarm systems. The 302 Series operates
within a controlled range of two to three degrees of their set points, regardless of the speed or rate of temperature rise. These detectors are available in either 135° F or 194° F ratings.
The Thermotech 302 Series Rate Compensation Heat Detectors are normally-open devices designed especially for fire detection and alarm systems. The 302 Series operates within a controlled range of two to three degrees of their set points, regardless of the speed or rate of temperature rise. These detectors are available in either 135° F or 194° F ratings.

5600 Series Mechanical Heat Detectors

The System Sensor® 5600 Series mechanical heat detectors offer a low-cost solution for property protection against fire and protection in conditions where the non-life safety installations may not require smoke detectors.
The System Sensor® 5600 Series mechanical heat detectors offer a low-cost solution for property protection against fire and protection in conditions where the non-life safety installations may not require smoke detectors.

Projected Beam Smoke Detector

The Gamewell-FCI projected beam smoke detector offers vital fire detection in applications where spot-type detectors are not adequate. This model is four-wire, 24 VDC and includes both the transmitter and receiver. Features include automatic compensation for signal drift or dirty lens, alignment LEDs for simple setup and adjustment and three field-adjustable sensitivity settings. This detector provides linear protection from 30 to 320 feet (9.144 to 97.539 m).
The Gamewell-FCI projected beam smoke detector offers vital fire detection in applications where spot-type detectors are not adequate. This model is four-wire, 24 VDC and includes both the transmitter and receiver. Features include automatic compensation for signal drift or dirty lens, alignment LEDs for simple setup and adjustment and three field-adjustable sensitivity settings. This detector provides linear protection from 30 to 320 feet (9.144 to 97.539 m).

BEAM 1224 Single Ended Reflected Type Beam Smoke Detector

The BEAM 1224 Series 4-wire projected beam smoke detector is uniquely suited to sense smoke in open areas with high ceilings where spot-type detectors are difficult to install and maintain.
The BEAM 1224 Series 4-wire projected beam smoke detector is uniquely suited to sense smoke in open areas with high ceilings where spot-type detectors are difficult to install and maintain.

Fire Ray Beam Detector

The Fire Ray is a new generation of the reflective beam smoke detector. The Fire Ray incorporates both an infrared transmitter and a receiver in one wall-mounted unit.
The Fire Ray is a new generation of the reflective beam smoke detector. The Fire Ray incorporates both an infrared transmitter and a receiver in one wall-mounted unit.

CO1224T Carbon Monoxide Detector w/ RealTest Technology

The System Sensor CO1224T CO detector provides early warning by using electrochemical sensing technology to measure carbon monoxide levels in the air. With RealTest™ technology, the CO gas sensing cell of the CO1224T CO detector can be tested using a carbon monoxide gas agent.
The System Sensor CO1224T CO detector provides early warning by using electrochemical sensing technology to measure carbon monoxide levels in the air. With RealTest™ technology, the CO gas sensing cell of the CO1224T CO detector can be tested using a carbon monoxide gas agent.