Skip Ribbon Commands
Skip to main content

Velociti Series Modules

​  ​

AMM-2F Addressable Monitor Module

The AMM-2F is an addressable monitor module. The AMM-2F provides a single Style B, Class B initiating device circuit (IDC) with a 47kΩ end-of-line resistor. The AMM-2F is compatible with with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.
The AMM-2F is an addressable monitor module. The AMM-2F provides a single Style B, Class B initiating device circuit (IDC) with a 47kΩ end-of-line resistor. The AMM-2F is compatible with with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.

AMM-4F Addressable Monitor Module

The AMM-4F is an addressable monitor module. The AMM-4F can be configured to provide a single Style D, Class A initiating device ciruict (ICD) or a single Style B, Class B IDC with a 47kΩ end-of-line resistor. The AMM-2F is compatible with with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.
The AMM-4F is an addressable monitor module. The AMM-4F can be configured to provide a single Style D, Class A initiating device ciruict (ICD) or a single Style B, Class B IDC with a 47kΩ end-of-line resistor. The AMM-2F is compatible with with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.

AMM-2IF Addressable Dual Monitor Module

The AMM-2IF is an addressable monitor module with two initiating circuits that act as an interface to dry contact devices such as waterflow switches and conventional pull stations. is The AMM-2IF compatible with with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.
The AMM-2IF is an addressable monitor module with two initiating circuits that act as an interface to dry contact devices such as waterflow switches and conventional pull stations. is The AMM-2IF compatible with with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.

AMM-2RIF Addressable Dual Input / Dual Output Module

The AMM-2RIF combines two relay outputs and two monitor inputs into one module device. Each monitor input provides an interface between a fire alarm control panel and one or more normally open contact-type devices. The AMM-2RIF is compatible with the E3 Series, S3 Series, and 7100 Series FIre Alarm Control Panels.
The AMM-2RIF combines two relay outputs and two monitor inputs into one module device. Each monitor input provides an interface between a fire alarm control panel and one or more normally open contact-type devices. The AMM-2RIF is compatible with the E3 Series, S3 Series, and 7100 Series FIre Alarm Control Panels.

AMM-4SF Addressable Monitor Module

The AMM-4SF is an addressable monitor module. The AMM-4SF can be configured for a single Style D, Class A initiating device ciruit, a single Style B, Class B initiating device circuit with a 47kΩ end-of-line resistor, or provide an address for a group of conventional 2-wire smoke detectors. The AMM-4SF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.
The AMM-4SF is an addressable monitor module. The AMM-4SF can be configured for a single Style D, Class A initiating device ciruit, a single Style B, Class B initiating device circuit with a 47kΩ end-of-line resistor, or provide an address for a group of conventional 2-wire smoke detectors. The AMM-4SF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.

AOM-2RF Addressable Relay Control Module

The AOM-2RF is an addressable output relay control module. The AOM-2RF allows a Gamewell-FCI addressable fire alarm control panel to switch discrete relay contacts via software code commands. The AOM-2RF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels
The AOM-2RF is an addressable output relay control module. The AOM-2RF allows a Gamewell-FCI addressable fire alarm control panel to switch discrete relay contacts via software code commands. The AOM-2RF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels

AOM-2SF Addressable Relay Supervised Control Module

The AOM-2SF is an addressable output supervised control module. The AOM-2SF allows a Gamewell-FCI addressable fire alarm control panel to switch an external power supply, such as a DC power supply or audio amplifier (up to 80VRMS) to notification appliances. The AOM-2SF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.
The AOM-2SF is an addressable output supervised control module. The AOM-2SF allows a Gamewell-FCI addressable fire alarm control panel to switch an external power supply, such as a DC power supply or audio amplifier (up to 80VRMS) to notification appliances. The AOM-2SF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.

MMO-6RF Multi-Mod - 6 Relay Output

The MMO-6RF is a multi-mod six relay output module that provides six (6), individually addressed, Form "C" control realy outputs on one board. The MMO-6RF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panles.
The MMO-6RF is a multi-mod six relay output module that provides six (6), individually addressed, Form "C" control realy outputs on one board. The MMO-6RF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panles.

MMO-6SF Multi-Mod - 6 Signal Output

The MMO-6SF is a multi-mod six signal output module that provides six (6) Style Y (Class B), or three (3) Style Z (Class A) supervised control circuits. Each supervised circuit may be used as an Audio speaker circuit, a notification application circuit (NAC), or a supervised control output. The MMO-6SF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panles.
The MMO-6SF is a multi-mod six signal output module that provides six (6) Style Y (Class B), or three (3) Style Z (Class A) supervised control circuits. Each supervised circuit may be used as an Audio speaker circuit, a notification application circuit (NAC), or a supervised control output. The MMO-6SF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panles.

MMI-6SF Multi-Mod Six Zone Interface Module

The MMI-6SF is a multi-mod six zone interface module that provides six (6) Style B (Class ,B) or three (3) Style D (Class A), supervised initiating device circuits (IDC). The supervised IDCs can be use with UL® Listed conventional 2-wire smoke detectors, or any normally open contact devices. The MMI-6SF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panles.
The MMI-6SF is a multi-mod six zone interface module that provides six (6) Style B (Class ,B) or three (3) Style D (Class A), supervised initiating device circuits (IDC). The supervised IDCs can be use with UL® Listed conventional 2-wire smoke detectors, or any normally open contact devices. The MMI-6SF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panles.

MMI-10F Multi-Mod-10 Input Module

The MMI-10F is a multi-mod ten input monitor module that provides ten (10) Style B (Class B) or five (5) Style D (Class A) supervised initiating device circuits (IDC). Each IDC is individually addressed and is suitable for a wide range of monitoring applications. The MMI-10F is compatible with the E3 Series, S3 Series, and the 7100 Series Fire Alarm Control Panels.
The MMI-10F is a multi-mod ten input monitor module that provides ten (10) Style B (Class B) or five (5) Style D (Class A) supervised initiating device circuits (IDC). Each IDC is individually addressed and is suitable for a wide range of monitoring applications. The MMI-10F is compatible with the E3 Series, S3 Series, and the 7100 Series Fire Alarm Control Panels.

M500X Style 7 Fault Isolator Module

The M500X is an addressable fault isolator module capable of isolating up to 20 addressable devices. The M500X is an automatic switch that opens when the line voltage drops below 4V, protecting other lines in the network from individual faults.
The M500X is an addressable fault isolator module capable of isolating up to 20 addressable devices. The M500X is an automatic switch that opens when the line voltage drops below 4V, protecting other lines in the network from individual faults.

ISO-6 500 Series, Fault Isolator Modules

The ISO-6 Six Isolator Module is an automatic switch that opens when the line voltage drops below four volts. Isolator modules should be spaced between groups of sensors or spaced with modules in a loop to protect the rest of the loop.
The ISO-6 Six Isolator Module is an automatic switch that opens when the line voltage drops below four volts. Isolator modules should be spaced between groups of sensors or spaced with modules in a loop to protect the rest of the loop.

MS-7 Series - Addressable Manual Pull Station

The MS-7 series is a family of addressable manual pull stations designed to be installed in the signalling line circuit (SLC) of a Gamewell-FCI addressable fire alarm control panel. The MS-7 Series is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.
The MS-7 series is a family of addressable manual pull stations designed to be installed in the signalling line circuit (SLC) of a Gamewell-FCI addressable fire alarm control panel. The MS-7 Series is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.